Certificates of products. Trade House BMZ JSC

Certificate № ROSS BY.MO10.Н01126 (GOST-R) for producing hot rolled steel of class А240, А240С Ø 12-36 mm for reinforcing concrete - steel constructions according to the requirements of GOST 34028-2016
2021-01-01

Certificate № ROSS BY.MO10.Н01127 (GOST-R) for producing hot rolled steel of class А240, А240С Ø 6-12 mm for reinforcing concrete - steel constructions according to the requirements of GOST 34028-2016
2021-01-01

Certificate no. CSC-CER 634488 (ICONTEC, Colombia) for the production of profile and smooth low alloyed reinforcing steel for reinforced concrete structures in accordance with the requirements of ASTM A706/A706M (2016)
2024-09-11

Certificate no. CSC-CER 634486 (ICONTEC, Colombia) for the production of profile and smooth low-alloyed reinforcing steel for reinforced concrete structures according to the requirements of NTC 2289 (2015)
2024-09-11

Certificate no. CSC-CER 634485 (ICONTEC, Colombia) for the production of profile and smooth low-alloyed reinforcing steel for reinforced concrete structures in accordance with the requirements of the Resolution of the Ministry of trade, industry and tourism no. 1856 (2017)
2024-09-11

Conformity certificate № 150SC005, TMS (Serbia) to produce hot rolled steel in coils B500В Ø 14 mm in accordance with SRPS EN 10080-2008 requirements
2019-06-27

Conformity certificate № 2163/3-2018 (MPA BAU, Germany) to produce reinforcing steel in coils B500В Ø 8-14 mm in accordance with DIN 488-1 and -3:2009-08 and -6:2010-01
2023-07-15

Conformity certificate № 163 Empa (Switzerland) to produce reinforcing bars in coils B500В Ø 8-10 mm in accordance with SIA 262-2013.
2018-12-31

Conformity certificate of GOST R certification system No. ROSS BY.АG35.N04453, for production of carbon and alloy hot-deformed seamless pipes for general purpose in accordance with GOST 8732-78, GOST 8731-74 requirements.
2020-08-14

Conformity certificate № 12/15 (ZETOM, Poland) for the production of ribbed steel in coils and bars В500A Ø 6, 8, 10 and 12 mm, intended for concrete reinforcement, as well as for the production of welded reinforcement mesh in accordance with the requirements of technical approval ITB № AT-15-9480/2015.
2020-02-27

Certificate № 10246-01 (Inspecta, Finland) to produce hot rolled reinforcement bars В500C Ø 10-32 mm according to SFS 1300:2017 requirements
2023-03-28

Conformity certificate № PC 002939 SIRIM (Malaysia) to produce hot rolled bars in straight length B500В Ø 10, 12,16, 20, 25, 32 mm in accordance with MS 146:2014 requirements
2019-04-28

Certificate № FCS BY.B1447З PRO 1.0059 “FCS- stroicertification” (Russia) for production of reinforcing bars A500C Ø8-40 mm according to requirements GOST 34028-2016 and GOST R 52544-2006
2021-03-12

Certificate № 85798 SII (Israel) for production of reinforcing bars S400D Ø10-32 mm, S500C Ø10-36 mm and reinforcing steel in coils S400D, S500C Ø8-16 mm according to standard SI 4466-3-2016
2018-12-31

Conformity certificate № 158 Empa (Switzerland) to produce rebar in straight length B500В Ø 12-32 mm (extended scope) in accordance with SIA 262-2013.
2018-12-31

Certificate of Approval № 000301 (CARES, Great Britain) to produce BS 4449:2005 Grade B500B Bar Ø 10-40 mm, plain round feedstock BS 4449 and BS 4482 Ø 6,3 – 13 mm, ribbed feedstock BS 4449 and BS 4482 Ø 6 – 16 mm.
2018-12-31

Certificate SPSC-9305, SPSC, Lithuania, for production of hot-rolled reinforcing steel У500 (Grade B500B, B500NC, K500C-T) Ø 10, 12, 14, 16, 20, 25 and 32 mm in conformity with standard LST EN 10080:2006 and producer’s technical specification СТК 840-01-2010.
2020-10-03

Certificate № FCS BY.B1447.PR01.0039 for production of low-alloy cold- deformed wire for concrete reinforcement Bp-1 Class with diameter 4 – 5 mm
2020-08-08

Certificate № 150SC007(TMS, Serbia) for manufacture of hot-rolled bars B500B Ø 8-12mm according to the requirements of SRPS EN 10080-2008.
2019-08-01

Certificate № 150SC006 (TMS, Serbia) for manufacture of hot-rolled bars B500B Ø 10-32mm according to the requirements of SRPS EN 10080-2008
2019-08-01

Certificate №10016-01 (Inspecta, Finland) to produce hot-rolled reinforcement bars B500B Ø 10-32 mm as per SFS 1300
2022-07-18

Certificate №10015-01(Inspecta, Finland) to produce cold-worked reinforcement bars В500А Ø 6-12 mm as per SFS 1300
2022-07-18

Certificate № PCC BY.И565.01ПР09.0073 of system «Rosstroicertification» (RU) for production of weldable reinforcing section class A500C Ø 8 mm in coils for reinforcement of concrete structures in compliance with GOST P 52544-2006 and CTO ACЧM 7-93
2019-08-16

Certificate № PCC BY.И565.01ПР 09.0072 of system «Rosstroicertification» (RU) for production of weldable reinforcing section class B500C Ø 5 -12 mm for reinforcement of concrete structures in compliance with GOST Р 52544-2006
2019-08-16

Certificate № BY/112 02.01.085 02339, (Gosstandard RB) for production of cold-worked plain nonprestressed rebar S500 ( Ø 4,0-5,0 mm) in coils for concrete reinforcement as per STB 1341-2009.
2021-06-30

Certificate №2163/2-2016 (MPA BAU,Germany) for production of cold reduced reinforcing wire B500A plain (+G) or indented (+P) ø 4-12 mm in conformity with DIN 488-3:2009, DIN 488-6:2010 (sign of conformity U)
2021-02-15

Certificate BY/112 02.01. 085 01554 for prestressed reinforcement bars for concrete structures; class S500, hot-rolled in bundles, diameter 6,0-10 mm in compliance with STB1704-2012
2020-10-19

Certificate №27/15 for production of steel ribbed reinforcing wire B500A ø 6, 8, 10 и 12mm according to the requirements of Technical Approval IBDiM №AT/2010-02-2641/3
2020-08-12

Certificate № 204/С5/2015/010-034355 for production of weldable reinforcing steel bars grade B500B ø 6-32 mm for the reinforcement of concrete structures (ø 10 and 32 mm in bars, ø 6 and 14 mm in coils)
2020-12-31

Declaration RoHS2 of conformity Directive 2011/65 / EU (Restriction of hazardous substances)
2020-12-31

Declaration RoHS according to Directive 2002/95/EC and 2011/65/EU about safety of supplied production
2020-12-31

Certificate № MD00/4297/0001/4 for production of seamless pipes and tubes in carbon and carbon manganese steel (maximum 168,3 diameter, 25 mm wall thickness) Lloyd’s Register requirements.
2020-03-04

Certificate № MD00/4297/0001/1 for production of steel-making and semi-finished products (maximum 200 mm diameter , 140mm diameter) in accordance with Lloyd’s Register requirements
2020-03-04

Certificate of TUV NORD Systems (Germany) № 07-203-1326-WP-1011/14 for production of hot-rolled steel bars and seamless tubes from ferrite steels according to the requirements of AD 2000-Merkblatt W0.
2020-04-01

Certificate No.ROSS BY.AG42.Н00265 for production of reinforcing bars grade A240 diameter 12-36 mm according to State Standard GOST 5781-82.
2019-05-16

Certificate No.ROSS BY.AG42.Н00264 for production of reinforcing bars grade A240 diameter 6-22 mm according to State Standard GOST 5781-82.
2019-05-16

Certificate No.Z-2.1.2-17-7409 (Wien-Zert, Austria) for production of cold deformed ribbed reinforcing steel B550A with Ø5 - 12 mm according to ONORM B 4707 requirements and Annex A (p. 2.1.2)
2022-10-18

Certificate No.ROSS BY.HA10.H01421 for hot-deformed seamless pipes used as casing pipe or pump-compressor pipe according to State Standard GOST 31446-2017
2021-11-19

Certificate of correspondence in accordance with GOST R No. ROSS BY.12.H01147 for manufacturing of heat-treatable rebars class At800C diameter 10-14 mm for reinforcement of concrete structures according to State Standard GOST 10884-94
2019-02-01

Certificate KIWA, Holland, No. № К65693/02 for production of reinforcement steel B500А: coils ш 5-12 mm in conformity with BRL 0501 and standard NEN 6008
2020-12-31

Certificate GOST P No. ROSS ВY.АП35.Н04453 for anchor fibre, wave fibre, microfibre,made of steel wire.
2020-08-14

Certificate«SPSC», Lithuania, No. SPSC-9137 for production of weldable cold-deformed reinforcing steel in coils BSt500KR(A) Ø 5-12 mm in conformity with standard LST EN 10080:2006 and producer’s technical specifications No.1098-0/CC-2011, No.1099-0/CC-2011, No.1100-0/CC-2011, No.1101-0/CC-2011, No.1102-0/CC-2011.
2019-03-18

Certificate«SPSC», Lithuania, No. SPSC-9139 for production of weldable cold-deformed reinforcing steel in coils BSt500KR(A) Ø 5-12 mm in conformity with standard LST EN 10080:2006 and producer’s technical specifications No.1098-0/CC-2011, No.1099-0/CC-2011, No.1100-0/CC-2011, No.1101-0/CC-2011, No.1102-0/CC-2011.
2019-03-18

Certificate«SPSC», Lithuania, No. SPSC-9138 for production of weldable cold-deformed reinforcing steel in coils BSt500M Ø 5-12 mm in conformity with standard LST EN 10080:2006 and producer’s technical specifications No.1098-0/CC-2011, No.1099-0/CC-2011, No.1100-0/CC-2011, No.1101-0/CC-2011, No.1102-0/CC-2011
2019-03-18

Certificate MPA BAU, Germany, No. 2163/1-2015 for production of reinforcing steel in coils B500А Ø 6-12 mm in conformity with requirements of DIN 488-1 и 3:2009-08 и DIN 488-6:2010-01.
2020-12-31

Certificate KIWA, Holland, No. K21941/07 for production of reinforcement steel B500B ø 10-32 mm in conformity with BRL 0501 and standard NEN 6008
2020-12-31

Certificate of compliance of TUV NORD Systems, Germany, № 0045-CPR-1011 for production of construction products: steel bars and seamless hollow sections, hot rolled, from structural steels with strength level S235 up to S460 according to DIN EN 10025-2:2005 as well as annex A and B of DIN EN 10210-1:2006
2023-02-28

Certificate TZUS, Czech Republic, No.204/c5/2010/010-027433 for production of ribbed rebars for concrete reinforcement B500A ø5-12 mm (BSt500M, BSt500KR)
2020-12-29

Certificate BY/112 02.01. 085 01551 for nonprestressed reinforcement bars for concrete structures; class S500, cold deformed in coils, diameter 4,0-12,0 mm in compliance with STB1704-2012
2020-10-19

Certificate BY/112 02.01. 085 01553 for nonprestressed reinforcement bars for concrete structures; class S500, hot-rolled in bundles, diameter 10-32 mm in compliance with STB 1704-2012
2020-10-19

Certificate BY/112 02.01. 085 01552 for nonprestressed reinforcement bars for concrete structures; class S2400, hot-rolled in coils, diameter 6,0-16,0 mm in compliance with STB1704-2012
2020-10-19

Certificate BY/112 BY/112 02.01. 085 01555 for prestressed reinforcement bars for concrete structures; class S800, hot-rolled in bundles, diameter 10-14 mm in compliance with STB1704-2006
2020-10-19

Certificate of compliance of TUV NORD, Germany from August 30, 2010, for the right to apply CE-mark on seamless pipes series H and M as well as on L, L1 and L2 type ø 21,3-165,1mm of non-alloy steel for welding and threading according to the requirements of DIN EN 10255:2004+A1:2007
2020-10-10

Certificate of Authority № 5CT-1300 (American Petroleum Institute) to use the Original API Monogram – manufacture of coupling stock Group1, H40/PSL 1, J55/PSL 1, K55/PSL 1, N80(1)/PSL 1 and N80(Q)/PSL 1, Group-2, L80(1)/PSL 1, Group-3, P110/PSL 1; manufacture of seamless casing or tube plain end Group-1, H40/PSL 1, J55/PSL 1, K55/PSL 1, N80(1)/PSL 1 and N80(Q)/PSL 1 , Group-2, L80(1)/PSL1 (the scope is expanded).
2020-11-03

Certificate TUV NORD (Germany)No0045-CPR-1011-EK3 for production of steel microfiber for concrete according to the requirements of EN 14889-1:2006 and European building regulations 305/2011 (right to apply CE-mark).
2023-03-31

Certificate TUV NORD (Germany) No0045-CPR-1011-EK2 for production of corrugated steel fiber for concrete according to the requirements of EN 14889-1:2006 and European building regulations 305/2011 (right to apply CE-mark).
2023-03-31

Certificate of TUV NORD Systems (Germany) № 0045-CPR-1011-EK1 for production of steel anchor fiber for concrete reinforcement according to the requirements of EN 14889-1:2006 and European building regulations 305/2011 ( right to apply CE-mark).
2023-03-31

Certificate Kontrollradet, Norway, for production of rebars B500NB and B500NC ø 10-40 on requirements of national standards NS-EN 10080:2005 and NS 3576, parts 2 and 3 and cold deformed reinforcement wire ø 6-12 mm B500NA on requirements of NS 3576 part 1.
2018-12-31

Certificate No.BY/112 03.12.088 00324 for steel fiber (anchor, wavy, straight) for concrete reinforcement
2022-08-03

Certificate No.15/16 of ZETOM (Poland) for reinforcing steel grade B500B ø10-32 mm (Technical approval) No.AT/2006-03-2031/9
2021-04-20

Zetom company (Poland) conformance certificate No. 144/13 about reinforcing bar production ø10-40 mm RB500W according to PN-ISO 6935-2:1998, PN-ISO 6935-2/Ak:1998, PN-ISO 6935-2/Ak/Ap1:1999
2018-12-18

Certificate of Authority № 5L-0634 to use the API Monogram Spec 5L – manufacture of Line Pipe Plain End at PSL 1 – Type of Pipe: SMLS/Delivery Condition N/Max. Grade: X65and/ Delivery Condition R/Max/ Grade X65; manufacture of Line Pipe Plain End at PSL 2 – Service Annex J – Type of Pipe: SMLS/ Delivery Condition: N / Max. Grade: X52 and/ Delivery Condition: Q/ Max. Grade: X65.
2020-11-03

Inspecta Certificate (Finland) №4453-06 for production of hot rolled reinforcing bars A500HW ø 10, 12, 16, 20, 20, 25 and 32mm, hot rolled reinforcing bars B500B ø 10, 12, 16, 20, 20, 25 and 32mm, cold deformed ribbed steel coils B500K ø 8, 10 and 12mm, hot rolled reinforcing bars A700HW ø 12, 14 and 16mm according to the requirement documents TR 361:2010, SFS 1202:2010, SFS 1202:2008, SFS 1215:1996, SFS 1216:1998 and SFS 1268:2010.
2020-12-31

Certificate No.11 9172-1/2 MPA NRW, Germany, for production of reinforcement rolled product b500b No.8-32 in conformity with DIN 488 parts 1, 2 and 6, Building Rules A, part 1.
2020-08-20

Certificate TZUS, Czech Republic, No.204/c5/2009/010-024561 for production of ribbed rebars for concrete reinforcement BSt500S (b500b) ø10-40 mm according to DIN 488 and national Czech standards.
2020-08-20

Certificate SBS, Sweden, for production of weldable ribbed reinforcement steel K500B-T, K500C-T ø 8-32 mm in accordance with Swedish standards SS 212540 (product class 2, hot-rolled and thermo-treated bars).
2020-08-31

Certificate of compliance TUV-NORD No.07-701-PZ-1011-P01 for production of pipes from steel grades E235, E275, E315, E355 ø 21,3-168,3mm with wall thickness range 3,0-25mm to the requirements of DIN EN 10297-1:2003-06.
2020-04-30